Industrial tooling portfolio

Precision tooling systems catalogue

Explore high-feed milling assemblies, indexable drills, deep-hole boring systems, precision dual-contact toolholders and PCBN/CVD turning grades. Filter by collection, machining operation, ISO workpiece alloy or authorized principal.

Collection / category

Machining operation

Target alloy (ISO)

Principal / brand

Showing all precision tooling systems
BTA Deep-Hole Drilling System (STS)
TAN-DRILL-BTA

BTA Deep-Hole Drilling System (STS)

Industrial deep-hole boring system for boreholes 15.6–50.1 mm delivering IT9 tolerance and Ra 3.2 µm finish.
OTW Superabrasive Honing Stones & Abrasives
TAN-HONE-OTW

OTW Superabrasive Honing Stones & Abrasives

Conventional silicon carbide/aluminium oxide and vitrified/metalbond diamond & CBN honing stones from Ohio Tool Works for precision bore finishing.
HEULE Automated Cross-Hole Deburring Solutions
TAN-DEBURR-HEULE

HEULE Automated Cross-Hole Deburring Solutions

Swiss-engineered automated front-and-back bore deburring, chamfering, and back-spotfacing tools completing both edges in a single spindle pass.
BIG DAISHOWA Precision BBT Tool Holding Systems
TAN-HOLD-BIGDAI

BIG DAISHOWA Precision BBT Tool Holding Systems

Japanese simultaneous dual-contact (BIG-PLUS BBT) toolholders, collet chucks, and digital/modular fine boring heads with runout < 1 µm.
KAVACH Extreme Temperature Protective Coating Series
TAN-HARD-KAVACH

KAVACH CBN Surface Engineering Coating

Advanced multi-layer CBN surface technology engineered to fuse with the substrate for extreme hardness, edge toughness, and anti-delamination.
Cermet High-Speed Finishing Inserts
TAN-HARD-CERMET

Deltacarb Cermet Turning Grades (DT1015U / C / DT1025C / DT1035C)

Four dedicated ISO P Cermet grades (DT1015U uncoated, DT1015C, DT1025C, DT1035C PVD) for high-finish steel turning in wet and dry cuts.
MUB3020K Micro-Grain Hardmetal Grade
TAN-HARD-MUB3020K

MUB3020K Uncoated High-CBN Grade (ISO K20)

Next-generation uncoated High-CBN grade with advanced metallic binder exclusively engineered for high-speed grey & alloy cast iron.
MCB7005H & MCB7030H CBN Hard-Part Turning Inserts
TAN-CBN-MCB7000

MCB7005H & MCB7030H Coated CBN Hard-Part Turning Inserts

KAVACH-coated CBN grades covering both continuous high-speed finishing (MCB7005H, ISO H05) and heavily interrupted hard turning (MCB7030H, ISO H30).
E1-Soft Tools Lathe Holders & Boring Bars
TAN-HOLD-E1LATHE

E1-Soft Tools Lathe Holders & Boring Bars

Complete ISO external lathe toolholders and internal coolant-through steel boring bars across C, D, S, T, V, and W insert geometries.
Shallow Grooving & Circlip Turning System
TAN-GROOVE-SHALLOW

Shallow Grooving & Circlip Turning System

High-precision shallow grooving inserts ground to tight tolerances for O-ring seats, circlip retaining grooves, and precision snap rings.
Dogbone Deep Grooving & Turning System
TAN-GROOVE-DOGBONE

Dogbone Deep Grooving & Turning System

Double-ended Dogbone grooving and profiling system delivering rigid clamping for deep radial parting, face grooving, and copy turning.
DTU6015N Mirror-Finish Aluminium Turning Grade
TAN-TURN-DTU6015N

DTU6015N Mirror-Finish Aluminium Turning Grade (ISO N)

Uncoated fine-grained carbide turning grade (ISO N10–N20) with mirror-polished rake face and 25° 12′ high-rake NP chipbreaker.
DTC5025 CVD Wear-Resistant Turning Grade
TAN-TURN-DTC5025

DTC5025M CVD Stainless Steel Turning Grade (ISO M)

CVD coated turning grade DTC5025M engineered specifically for ISO M20–M30 stainless steels, combining gradient core toughness and smooth TiN outer wear layer.
DTC3000K CVD Cast Iron Turning Series
TAN-TURN-DTC3000K

DTC3000K CVD Cast Iron Turning Series (DTC3005K & DTC3015K)

Multilayer TiCN–Al2O3 CVD cast iron series (DTC3005K for high-speed finishing, DTC3015K for medium/interrupted cuts) on Grey & Ductile Cast Iron.
Deltacarb DTP5035M Tough Machining Turning Grade
TAN-TURN-DTP5035M

Deltacarb DTP5035M Stainless Steel PVD Turning Grade (ISO M)

Multilayer PVD turning grade (ISO M) engineered as “Master of Stainless Steel” for uninterrupted performance in heavy interrupted cuts and sticky alloys.
Deltacarb DTP4025U Universal Turning Grade
TAN-TURN-DTP4025U

Deltacarb DTP4025U Universal PVD Turning Grade (ISO P / M / S)

Universal multilayer PVD turning grade covering ISO P20–P30, M20–M30, and S20–S30 from steels and stainless steels to Inconel & superalloys.
Deltacarb DTP4015S Stainless Steel Turning Grade
TAN-TURN-DTP4015S

Deltacarb DTP4015S Superalloy & Titanium PVD Grade (ISO S)

Specialized dual-tone PVD turning grade (ISO S10–S20) for Heat-Resistant Superalloys (HRSA), Nickel/Cobalt alloys, Titanium & engine valves.
Deltacarb DTP2000P Steel Turning Series
TAN-TURN-DTP2000P

Deltacarb DTC2000P / DTP2000P CVD Steel Turning Series (ISO P)

Dual-grade CVD steel turning series (DTC2015P for P10–P20 high-speed finishing, DTC2025P for P20–P30 uneven forgings & general turning).
Precision Industrial Gundrill Series
TAN-DRILL-GUN

Precision Industrial Gundrill Series

Precision small-to-medium diameter deep-hole gun drills (Ø0.9–12.0 mm) delivering IT7–IT8 accuracy and Ra 0.8–1.6 µm bore finish.
MXD Indexable Drills Series
TAN-DRILL-MXD

MXD Indexable Drills Series (D2–D5)

Balanced 2D, 3D, 4D, and 5D indexable insert drills from Ø13.0 to Ø68.0 mm (0.5625″–2.625″) with 4-corner MDXT inserts and spiral internal coolant.
Octa Force SNMZ12 High-Feed Milling Series
TAN-MILL-OCTA

Octa Force SNMZ12 High-Productivity 88° Milling Series

Conqueror SNMZ120412ZNER 8-edge 88° milling system supporting 6 mm depth of cut with minimum 20% lower spindle load vs. SNMX1204.
MSSM + SOMX12 Shoulder Milling Series
TAN-MILL-MSSM

MSSM + SOMX12 True 90° Shoulder Milling Series

True 90° square shoulder milling series with SOMX120408PDER-M inserts (Ap ~ 8 mm) in grade DMP2030P across Ø40–100 mm cutters.
MSFM + SEMT 45° Face Milling Series
TAN-MILL-MSFM

MSFM + SEMT 45° Face Milling Series

45° entering angle face milling series (Ø40–250 mm, 3–24 teeth) using SEMT13T3AGSN-JM inserts (Ap ~ 5 mm) for Steel and Cast Iron.
H1-MHRM-SNMZ Heavy Duty High-Feed Cutter
TAN-MILL-MHRM

OctaForce MHRM-SNMZ 88° 8-Edge Cast Iron Milling Cutter

Powerful 88° rough & face milling cutter (Ø40–200 mm, 4–16 teeth) with 8-edge SNMZ120412 inserts cutting up to 6 mm depth in Grey & Ductile Cast Iron.
H1-MGSM-APMX 90° Shoulder Milling Cutter
TAN-MILL-MGSM

MGSM-APMX 90° Square Shoulder Milling Cutter

Versatile 90° square shoulder milling solution compatible with APMX11 (Ap ~4 mm) and APMX16 (Ap ~6 mm) inserts across Ø16–63 mm cutters.
H1-DoubleHexa Milling Cutter by Deltacarb
TAN-MILL-DHEXA

Double Hexa MFHN09 12-Edge 45° Face Milling Cutter

Cost-effective 12-cutting-edge hexagonal roughing face mill (MFHN09, Ø40–160 mm, 45° lead) supporting up to 4.5 mm DoC in Steels and Cast Iron.
High-Velocity Aluminium Milling Cutters
TAN-MILL-ALU

MAAM & MSAM High-Efficiency Aluminium Milling Cutters

MAAM (AOGX11/19) & MSAM (SDGT1204) aluminium milling cutters with high-rake polished DMU6020N inserts for burr-free roughing to finishing.
Garud High-Feed Milling Series
TAN-MILL-GARUD

Hi-Pro Garud High-Feed Milling Series (MHFL / MHFS / MHFW)

Expansion 2.0 Hi-Pro High-Feed Series spanning MHFL (LNMX0603), MHFS (SDMT1205), and 6-corner double-sided MHFW (WNMX0807) up to 2.5 mm/tooth.
MXSM True 90° Shoulder Milling Cutter
TAN-MILL-MXSM

MXSM True 90° Shoulder Milling Cutter (6-Edge XNMU)

True 90° square shoulder milling cutter with strongest-ever 6-cutting-edge neutral XNMU080608EN-GM inserts supporting up to 7.0 mm DoC.