Garud High-Feed Milling Series

← Back to Full Catalogue

SKU: TAN-MILL-GARUD

Category: Milling Tools

Principal: Motherson Techno Tools (MTTL)

Hi-Pro Garud High-Feed Milling Series (MHFL / MHFS / MHFW)

Expansion 2.0 Hi-Pro High-Feed Series spanning MHFL (LNMX0603), MHFS (SDMT1205), and 6-corner double-sided MHFW (WNMX0807) up to 2.5 mm/tooth.

Target ISO Materials: ISO H — Hardened Steels (45–65 HRC) · ISO K — Cast Iron · ISO M — Stainless Steel · ISO P — Steel & Alloy Steels

Machining Operations: Cavity Milling · High-Feed Roughing

Technical Specifications & Recommended Parameters

Overview

The Hi-Pro Garud High-Feed Series (Expansion 2.0) uses a curved cutting edge across three dedicated platforms—MHFL/MHFLN (negative 4-corner), MHFS/MHFSD (positive 4-corner), and the new MHFW (double-sided 6-corner WNMX0807)—for aggressive metal removal in steels up to 50 HRC, stainless steels, and cast irons.

Series & Cutting Parameter Comparison

Cutter / Insert Ap Max Diameters Speed Vc (m/min) Feed Fz (mm/tooth)
MHFL / MHFLN (LNMX0603) 0.70 mm Ø16–Ø63 mm 70–180 (Steel) | 100–280 (CI) 0.3–1.4
MHFS / MHFSD (SDMT1205) 1.40 mm Ø32–Ø100 mm 70–180 (Steel) | 110–280 (CI) 0.5–2.0
MHFW New! (WNMX0807 6-corner) 2.20–2.50 mm Ø35–Ø160 mm 75–160 (Steel up to 50 HRC) 0.75–2.50

Grade Selection

  • DMP2030P & DMP2130P: Steels, stainless & tool/mould steels up to 50 HRC
  • DMP3030K & DMC3020K: Expansion 2.0 grades for high-speed & general Cast Iron high-feed milling

Official Engineering Catalog & Datasheet

Download the official engineering PDF with cutting speed/feed tables, insert geometries, and machining parameters.

Download Hi-Pro High-Feed Expansion 2.0 Catalogue (PDF)

Need grade selection or machining parameters for your alloy?

Send us your component drawing, machine spindle taper, and target alloy. Our Al Khobar technical desk coordinates factory-backed application recommendations and trial tooling.